Diy Bow Stand

If you do not have the time or budget to buy a bow stand than One thing you can do is to make your own bow stand.

WHAT YOU NEED YOUR OWN BOW STAND

Plywood – cut to 2ft. x 2ft.

3 pcs. PVC Flange

4 pcs. Elbow Fitting

3 pcs. PVC T Fitting

2” diameter PVC Pipe
Cut to varying lengths

HOW TO MAKE YOUR OWN BOW STAND

1. Start by affixing 2 of the front flange on the plywood. They should be 17” apart from center to center of both holes.

2. Put together the set of pipes and fittings that will make up the front legs and hanger for the bow before you set both in the flanges.

3.1 Put together the third leg separately before attaching it to the elbows.
3.2 Heat the pipe to make a bend before cutting it to the appropriate length.

4. As long as the pipes are firmly glued together, set the third flange to hold everything together.

Once you have done all the above things you have your own bow stand.

 

DIYBowStand

Leave A Reply

Navigate